45 kVA Three Phase 50Hz/60Hz/400Hz Frequency Converter

Description

45 kVA three phases 50 Hz, 60 Hz, and 400 Hz solid state frequency converter, convert AC power source 50Hz to 60Hz, 400Hz with pure sine wave output, direct sale by manufacturer in low cost.

45 kVA three-phase solid state (static) frequency converter, converting 50Hz to 60Hz, 400Hz with pure sine wave output, compatible with 3 phase 220V – 240V, 380V, 400V – 480V power system.

Tips: Why we don’t use frequencies higher than 50Hz/60Hz?
Why we don’t go to higher frequencies, like 100Hz or 120Hz, or even 400Hz like on aircraft? This would reduce the transformer and generator sizes even more. The main issue would be in change management if there was to be a change. Because then all our electronic gadgets would no longer work on the mains. However, it would make the design of consumer electronics a lot cheaper if everyone used the same standard. But that would be a colossal task to convince the Americans that their transmission medium is against the rest of the world’s standard. It’s bad enough that they don’t want to adopt the metric standard.

It is generally accepted that Nikola Tesla chose 60 Hz as the lowest frequency that would not cause street lighting to flicker visibly. The origin of the 50 Hz frequency is open to debate but seems likely to be a rounding off of 60Hz to the 1 2 5 10 structure popular with metric standards.

Model	HZ-50-3345
Capacity	45 kVA
Dimension	900*800*1200 mm
Weight	400 kg
Input	Voltage	3 Phase 4 Wire: Wye Type 190/110, 200/115, 208/120, 220/128, 230/132, 240/139V ±10% (option *)
		3 Phase 4 Wire: Wye Type 380/220, 400/230, 415/240, 440/254, 460/265, 480/277V ± 10% (option *)
		3 Phase 4 Wire: Della Type 220, 230, 240, 380, 400, 415, 440V ± 10% (option *)
	Frequency	50 Hz, 60 Hz or 400 Hz ± 5%
Output	Voltage, current	110V Setting (Low grade): 0-150V (phase voltage), 0-260V (line voltage) 125A
		220V Setting (High grade): 0-300V (phase voltage), 0-520V (line voltage) 62.5A
	Load stabilization Rate	≤±1%
	Frequency	50Hz, 60Hz up to 400Hz adjustable Note: -When the output is 400Hz, the load capacity can only reach 50% of the rated capacity. -When the output is ≤120Hz, the load capacity can reach 100% of the rated value. -You can just adjust the converter output frequency in the range (40-400Hz) for the 400Hz option.
	Frequency Stability	≤±0.01%
	Harmonic Distortion	Pure Sine Wave ≤2%
	Frequency meter	4 digit, digital frequency meter, resolution 0.1Hz/Step
	Voltmeter	4-digit, digital voltage meter, resolution 0.1V
	Ammeter	4-digit, digital ammeter, resolution 0.1A
	Watt meter	4-digit, digital Watt meter, resolution 0.1W
Protection	With overload, short circuit, over temperature
	Instantaneous power failure protection and alarm device
Working Environment	Temperature	0 – 40 deg.℃
	Humidity	0 – 90% (Non condensation)
Warranty	18 months